7
Safe belt
INSTALLATION & SETUP
Your E-Traveller will arrive carefully packaged in a cardboard box.
1. Open the top of the box then turn the box on the side for easier unpacking.
2. The box will contain the below components
Chair, main assembly
Charger with power cables
Seat cushion
Lithium battery*2pcs
Seat belt
Battery direct charge transfer
cable
3. To unfold your E-Traveller, hold the push bar and use your other hand to pull the
bottom of the seat down towards the ground.
Grasp push bar
Hold down seat to expand
1. Install the controller into the open slot on the armrest of the chair. This can be done on
either the right or left-hand side. Tighten knob located under the armrest to secure the
controller in place.