E-TOP BR080n Page 76 User Manual Download

Page: 76 / 90

Version 1.0.15

Users can set or change their password in this section.

1. New

Password

Enter the new password you want to change.

New Password (Confirm)

Enter the new password again for confirming.

3. Apply

Cancel

Click

Apply

to continue or

Cancel

to clear the settings on this page.

Note: 1. Only the password can be changed, the user name for administrator is

admin

and not to be changed.

2. If you forget administrator’s password, please reset 11N WLAN Mobile Server Router to default setting by
pressing the “

Reset

” button on the rear panel over 5 seconds. And the password will return to

admin

5.5.2 Upgrade

Firmware

There is certain risk while upgrading firmware. Upgrading firmware is not recommended

unless the significant faulty is found. You can upgrade the firmware of 11N Mini Router on this

page. Make sure the firmware you want to use is on the local hard drive of the computer. Click

Upgrade

Firmware

to proceed.

Summary of Contents for BR080n



























































































Search results

Summary of Contents for BR080n

Reviews:

Related manuals for BR080n

Brands by name

Popular brands

E-TOP BR080n, User Manual

Search results

Summary of Contents for BR080n

Reviews:

Related manuals for BR080n

Brands by name

Popular brands