Version 1.0.15
12
To begin with 11N Mini Router, you must have the following minimum system requirements. If
your system can’t correspond to the following requirements, you might get some unknown
troubles on your system.
XDSL/Cable Modem and broadband Internet Account.
One Ethernet (10 BASE-T or 10/100 BASE-TX) network interface card.
CP/IP and at least one web browser software installed (E.g.: Internet Explorer 5.0,
Netscape Navigator 7.x, Apple Safari 2.03 or higher version).
At lease one 802.11g (54Mbps) or one 802.11b (11Mbps) wireless adapter for wireless
mobile clients.
Recommended OS: Win2000 or WinXP / Linux.
1.4
WAN Network Plug and Play
WAN
Type
auto-detection
：
When using Ethernet auto-connection:
¾
Auto-detection mode only applies on PPPoE, DHCP, PPTP and L2TP.
¾
Router will detect WAN type and load the settings from last time or display
corresponding page for user to input information.
¾
If there is no setting from user, the router will load the default settings.
If there is no setting from user, it will detect ISP and load corresponding settings.
1.5
Get Your IP Automatically & Manually
After 11N Mini Router connected with your computer, please make sure your IP is in the
automatic IP position or you adjust it manually in order to activate the Internet network from
home to Internet. If you don’t know how to enter the settings, please follow the steps as
below.
Step 1.
Go to
Start
>
Settings
>
Network Connections
and then select
Local Area
Connection
.
