8. V-BELT DRIVING SYSTEM/KICK STARTER ARM/STARTER CLUTCH E-TON
8-8
Apply with grease 4~5 g to inside of driving
shaft hole, and install driving pulley hub.
Caution
Install siding pulley assembly onto crankshaft.
Driving pulley install
Press driving belt into pulley groove, and
then press down the up & down sides of the
driving belt to separate it away from the
driving pulley hub.
Caution
Install driving pulley, washer and nut.
Caution
Hold driving pulley with universal fixture.
Tighten nut to specified torque.
Torque value: 5.0~6.0 kgf-m
Install left crankcase cover.
The pulley surface has to be free of
grease. Clean it with cleaning solvent.
Make sure that two sides of pulley
surfaces have to be free of grease.
Clean it with cleaning solvent.
To press down the up & down sides of the
driving belt can avoid to pressing and
damaging the belt when installing the
driving pulley, and also can make sure that
the driving pulley can be tighten.
Driving belt
Press down
Pulley bush
Sliding pulley
Limited speed
bush
Crankshaft
Pulley surface
Pulley bush
Summary of Contents for sport 50
Page 129: ...13 BRAKE E TON 13 2 Rear Drum Brake System 0 8 1 2 kgf m 0 8 1 2 kgf m...
Page 176: ......
