E-TEN SPUX650, User Manual, Page: 33 / 266

Getting Started 1-17
Clean Boot
V
Cold boot method: Hold the “Power
Button” of the Pocket PC with one
hand while holding the stylus tip to
push in the “Reset Button” with the
other. Simultaneously release both the
“Power Button” and “Reset Button”.
V
Appropriate situation: If a previous reset has already been attempted and
the Pocket PC is still unable to maintain normal operations, has no
response, or if the screen is frozen.
V
Before executing the preceding “Cold boot method”, please carefully
consider the following instructions and then decide on the cold boot
method.
1.
After a cold boot is performed, if no buttons are pressed, when Pocket PC
automatically completes the system startup process, the last display will be
the Today screen. This is identical to the reset result.
2.
If a previous reset has already been attempted but the Pocket PC is still
unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button on the bottom right of Pocket
PC until the system inquiry screen is shown, and then release the End
Button. Next, please read thoroughly through the instructions on cold
booting before continuing carefully.