E-TEN SPUX650, User Manual, Page: 232 / 266

13-4
Tips
„
All the names in Contacts will automatically become recognizable
contacts in the “Voice dialing” syntax. However, if the number of
contacts exceeds 1000 entries, the system will not recognize the excessive
entries. To add these entries to Voice Commander for recognition, tap
Menu and then Settings or run Voice Commander Settings to check
and add these contacts manually for voice recognition.
„
If your volume is too low or if your surroundings are so noisy that the
system cannot recognize your voice, the system will prompt you “Please
say again.” Adjust the distance between yourself and your Pocket PC or
reduce the noise and try again.
Tips
If the user has a heavy accent that may cause poor voice recognition, use
any of the following methods to train the personal digital adapted model in
order to increase recognition:
1.
Tap Menu , Setting , and then the Digit Training tab.
2.
Tap Voice Commander Settings and then the Digit Training tab.
Tips
„
You can also tap Voice Commander , Menu , and then Exit to end Voice
Commander .
„
If you open another program while using Voice Commander and it
covers the Voice Commander screen, Voice Commander will terminate
automatically.