Copyright © 1985~ 2007, E-TEN Information Systems Co., Ltd. All Rights Reserved.
8
CHAPTER 3. FUNCTION BLOCK-DIAGRAM
CHAPTER 4. MODE SWITCHING
Function
Procedure
Hardware Reset
1. Press and hold POWER button
2. Press RESET button and release both
(power & reset) buttons at the same time
Software Reset
Press RESET button
Testing (Build-in) Program
1. Press and hold CAMERA button
immediately after doing a hardware reset
2. Release CAMERA button after the
testing program shows up on the LCD
Clean-boot Option
(new)
1. Press POWER button and RESET button
after ‘glofiish’ screen shows up
2. Long Press END button after the clean boot
option shows up on the LCD
