Copyright © 1985~ 2007, E-TEN Information Systems Co., Ltd. All Rights Reserved.
10
Keypad Pad/Keyboard
test
Follow each of the instructions and press BLACK or GREEN
hinted button in order.
*There’re five sub-testing items in this program.
Tap up-right corner to exit if passed all pad test
T Panel
Touch Panel test
Take stylus to draw few lines slowly around the screen rims
and center.
*Breaking lines or screen un-alignment is not allowed.
Tap up-right corner to exit
AUDIO
Voice record/reply test
1. Tap Recording icon and talk to the microphone for 1-2 sec,
the voice will reply the recorded sound automatically.
2. Plug your headset and run the record/reply test again.
3. Tap Receiver, and tap “PASS” after hear a tone by phone
generated.
Tap up-right corner to exit
LCD
LCD color test
Tap screen repeatedly. Check color screen if normal or any
defective pixels on it.
Tap up-right corner to exit
BackLight
LCD backlight test
Tap “Back Light On/Off” and tap “scroll up/down” to test
backlight.
Tap up-right corner to exit
LED
LED indication test
Tap “ALL ON”/ “ALL OFF” to check all indicative color LED
turns on/off.
Tap up-right corner to exit
Vibrator Vibration
test
Select “Vibrator On then Off” to check if device is vibrating.
Tap up-right corner to exit
ADC
Main battery test
Test main battery calibration(Power supply & Dummy battery
needed)
Tap up-right corner to exit if screen shows PASS
Battery
Battery switch function
test
Follow the procedures and check screen shows “PASS!”
Tap up-right corner to exit
Camera
Built-in camera access
test
Check the screen shows live video by camera lens.
*2M AF/VGA Camera is in rear/front side of the device.
Tap up-right corner to exit
GSM GSM/3G
modem
test
Tap “GSM” to check firmware version is correct release.
Tap power button to exit
B&E Info
Read SW/HW version,
BD address, Power
Master Meter
Tap “Read SW Version” to check the system software and
language version.
Tap up-right corner to exit
