SHANGHAI ESURVEY GNSS CO., LTD.
24
4.2
Quick setting
You can quickly set the receiver by the panel key. It includes six parts: device info, start
record, transmit data, network settings, antenna settings and other settings.
Start Record:
In the main interface, lightly press F2 key you can see the options shown
in figure 4-6.
Figure 4-6
Lightly press power key to confirm, then enter into
“Start Record”, you can see the page
shown in figure 4-7.
Figure 4-7
When the static is stopped, the cursor stops at the row of "Start Record"
Transmit Data:
When you transmit data by the panel, first you need to set the transmission parameters in
the WEB UI page, then you can operate the panel. There are not transmission parameters
settings on the setup panel.
Figure 4-8
Figure 4-9
You can quickly set differential type, start and stop transmit data.