SHANGHAI ESURVEY GNSS CO., LTD.
13
3.3.4 Network
From Network option, the user can set the device network and FTP server settings as shown
in figure 3-12.
Figure 3-12
DHCP:
If the mode DHCP is enable, the NET20 Plus receiver will auto get an IP address,
otherwise it uses the static IP.
WIFI hotspot:
If WIFI hotspot option is enable, then you can use other devices equipped
with WIFI to search and connect to the NET20 Plus receiver. The hotspot is named by the
serial number of the
receiver. You don’t need to input a password. Access NET20 Plus by
IP address 192.168.10.1.
The hotspot only play the role of control and can’t access to
internet.
WIFI Client:
When selecting WIFI client, in SSID box input a name of WIFI hotspot can
be used for the search, and in the Password box input the password for connecting to
WIFI hotspot, then submit. After connecting to the connection WIFI, the password can be
seen in system terminal or panel interface (the displayed place will be different in different
versions).
Mobile network:
enable Mobile Net to use the SIM card into the NET20 Plus, it supports
4G network. Users can set the user name and password if required.
FTP download:
You can set the parameters of the FTP server. If anonymous access is
turned on, it does not require a user name and password to connect to the NET20 Plus. If
anonymous access is turned off, enter the user name and password.