Page
31
IMPORTANT for a CHARGE COMPLETE indication flight of
the digital display must be at 42 so that the load of the
Balance Bike is complete.
-
Once the connection is made, check the load levels on the
digital display battery & VOLTAGE indication:
- To unplug after charging, please unplug the power
cable from the socket 230V.
Close the cover of the frame of the Balance Bike .
ii) Warnings on the load
Please keep the loading clean and dry environment.
Please use a power outlet standard 230 Volt. Make sure
that the charging of the Balance Bike port and one of the
power cable are dry. If the charging port is wet, do not put
the Balance Bike in charge.
The MAXIMUM charging time should not exceed 6 h, if it is
outdated this will affect the longevity of the battery, similarly a
load time too long could cause an overheating and thus
increase the risk of fire or explosion. ALWAYS unplug the cable
1
– Press the M function of the
digital display the balance bike
should be 5 bar for a full
charge. Check that the load
bars are complete, and that
the light turns green to be sure
that it is charged to 100%
3
