background image

Med-Time can be locked us-
ing the enclosed key.  
To lock Med-Time, turn the 
key a quarter of a turn 
counter-clockwise. 

Batteries should be changed when the indicator 
lights up on the clock display (normally after 
3-6 months of normal use). Batteries: Four 
Alkaline AA batteries. Fit the batteries as 
indicated in the battery compartment.  Clock time, alarm 
settings and alarm tone will remain set after battery change.  
 
IMPORTANT! When necessary, plastic parts can be wiped off 
with a damp cloth. Do not wash the Med-Time as electric 
components will be damaged 

Alarm Tone(s)

 

Med-Time has 3 different alarm tones to accomodate different 
hearing levels. Symbols A, B and A+B on the display indicate 
the selected alarm tone. To change the alarm tone of Med-
Time, first hold button 3 and then, at same time  press and hold  
button 1 to choose the next alarm tone. Continue to hold 
button three and press button 1 to listen to and select the 
different tones.  
 

No alarm signal 

If you do not require an audible alarm signal, continue to press 
button 1 until neither the A, B or A+B alarm tone setting is 
displayed. 

Lock 

Maintenance

 

Battery indicator. 

Med-Time is designed to remind and dispense pills 
(medications and vitamins) in accordance with your dosage 
schedule from one (1) to four (4) times per day.  

Med-Time 

 

Using Med-Time for the first time:

 

Open the battery door 
and remove the plastic 
strip to turn on  
Med-Time. 

Open the lid as illus-
trated to access and 
remove the Med-Tray. 
Insert the appropriate 
dosage template (1 to 
4X daily) on the tray 
and load your pills ac-
cordingly.  

Summary of Contents for Med-Time

Page 1: ...t Street Wellesley MA 02481 1 800 549 0095 www epill com Manufactured by AMERICAN MEDICAL ALERT CORPORATION AMAC 3265 Lawson Boulevard Oceanside New York 11572 Phone 1 800 645 3244 Version 031001 Med Time e pill Automatic Pill Reminder and Dispensing System User Instructions ...

Page 2: ...remove the batteries re program the device as necessarry and run the self test as described below If the fault cannot be corrected contact your distributor Self Test Med Time has a built in self test function Start Test Make sure that the Medication Tray is in the device Press button 1 for at least 10 seconds The CH message should appear on the display To exit the test mode press button 3 When the...

Page 3: ...ndicate the selected alarm tone To change the alarm tone of Med Time first hold button 3 and then at same time press and hold button 1 to choose the next alarm tone Continue to hold button three and press button 1 to listen to and select the different tones No alarm signal If you do not require an audible alarm signal continue to press button 1 until neither the A B or A B alarm tone setting is di...

Page 4: ...he setting mode it will automatically return to normal function after approximately one minute Setting and checking the alarm times 1 Press button 1 and then release The Alarm 1 symbol will begin to blink To set alarm time 1 press buttons 2 hours and 3 minutes If you wish to cancel the alarm press button 2 until is displayed which occurs after 23 00 or 11 00 p m 2 After you have programmed the cor...

Reviews:

Related manuals for Med-Time