Version 1.0
Type
Pedelec
Weight
32kg
Permissible Gross Weight
Maximum 120 kg
Dimensions (W D H) mm
× ×
1540x300x880
Maximum Speed
42km/h(Limited)
Maximum Mileage
38-47km
Display
3 step LCD
Battery
48V, Li-ion,13Ah
Chargers
100V~240V/42V*2A
Charging time
3~4 hours
Brakes
Disc Brake
Motor
48V 500W
×
Pedal sensor
Speed sensor
8. Installation guide
8.1 Take out the Ebike and check the parts list
①
Complete Ebike packaging is as shown in the figure below, and check whether the parts are damaged.
②
Check whether the parts are complete. The seat post saddle and handlebars are tied to the Ebike, and the
front wheel quick release is tied to the front fork legs. (Use scissors to cut the cable tie for assembling use)
In addition, there are pedals, charger, charger cable and tools in the cardboard box.
8.2 The front wheel
①
Tear off the front fork packaging and install the front wheel on the front fork.
②
Pay attention to the orientation of the front wheel: the front wheel disc is on the same side as the front fork
disc brake seat, and the axles on both sides are installed in place.
③
Install the quick release, loosen the screw, the quick release handle is in the same direction as the disc
brake, pass the other side, install the spring and nut.
④
Tighten the nut and turn the quick release handle upward Press tightly, pay attention to the handle pressing
force not too loose, to ensure that the front wheel is locked.
⑤
After the front wheel is assembled. turn the front wheel to check whether the front wheel rotates smoothly.
10
