37
Hyper Terminal for COM Port
Initiate another Hyper Terminal as COM Port Terminal (in Figure 4.3, select
COM 1 or other COM port i
nstead of “TCP/IP (Winsock)”). To set COM port
Properties same as Serial Port of converter (9600.N.8.1).
(Figure 4.3)
Data Transmission
When all steps described above are finished, type any characters on COM
Port Terminal and check if the typed characters are also displayed on
TCP/IP Winsock Terminal. Alternatively, check if characters typed on
TCP/IP Winsock Terminal also displayed on COM Port Terminal. If yes, then
all settings are correct and converter can operate properly.
