![background image](http://html1.mh-extra.com/html/e-mu/proteusx/proteusx_operation-manual_3118433092.webp)
6 - Voice Editor / Synthesizer Level
Modulation Cords
92
Proteus X Operation Manual
Modulation Cords
Each voice contains 36 Cords which are used to route modulation sources to destina-
tions and control the amount of modulation. There are only three permanently
connected modulation connections:
amp envelope-to-amplifier
,
pitch wheel-to-pitch
,
and
key-to-pitch
. All other modulation routings must be connected with a Cord.
Modulation Sources
Source
Description
Crossfade Random
Generates the same random value for all voices in a preset. This
source is intended to be used for crossfading voices.
Key (+, ~)
Key Tracking - This value increases as you play up the keyboard.
Velocity (+, ~, -)
Key Velocity - This value increases as the key is played harder.
Release Velocity
This value increases the slower you release the key
Gate
This value goes to full value as long as a key is depressed.
Pitch Wheel
MIDI data from your keyboard’s pitch bender.
Cord
Sources
Cord
Destinations
Modulation Amounts
Cord Page Select Buttons
Modulation
Source
LFO 1
Destination
/-
Amp
Volume
-
+
Tremolo is created by routing an LFO to the Amp Volume using a Cord.
Summary of Contents for ProteusX
Page 1: ...E MU Systems 1 Desktop Sound Module Desktop Sound Module Operation Manual Operation Manual...
Page 10: ...10 Proteus X Operation Manual...
Page 54: ...4 Multisetup Global Controls Working with Multisetups 54 Proteus X Operation Manual...
Page 134: ...7 Effects Effects Descriptions 134 Proteus X Operation Manual...