![background image](http://html.mh-extra.com/html/e-mu/planet-phatt/planet-phatt_operation-manual_518555097.webp)
Chapter 6: Step-By-Step
89
STEP-BY-STEP
You have just connected the Auxiliary Envelope Generator to the
Filter Cutoff as shown in the diagram below.
Now go back to the Aux Envelope screen.
AUX ENV AMT DLY
+100 000
Move the cursor underneath the envelope amount and change the
value to about +100. Now when you press a key the filter will slowly
sweep up. Because the filter Q is set high, you can hear the different
harmonics of the sound being accentuated as the filter cutoff sweeps
past.
Now, scroll back to the Auxiliary Envelope parameter screen.
A: A H D S R
15 00 00 99 50
Change the attack rate and note the change in the sound. The diagram
below shows approximately how the envelope looks when the param-
eters are set as shown above.
••• Note that all the enve-
lope parameters are
Rates
except for
Sustain
, which is
a
Level
.
R
L
Pan
Instrument
Tone
Filter
DCA
Aux. AHDSR
Fc
Q
Attack Time
Sustain Level
Release Time
time
Summary of Contents for Planet Phatt
