![background image](http://html.mh-extra.com/html/e-mu/planet-phatt/planet-phatt_operation-manual_518555036.webp)
Planet Phatt Operation Manual
28
MASTER MENU
• Tempo Control
This function allows MIDI controllers to change the Global Tempo
which is used for Beats mode, Retrigger, and the synced LFOs. Any
controller number from 0-31, mono pressure, or the pitch wheel can
be assigned to change the Global Tempo. A different controller can be
used to change the tempo up or down. The Pitch Wheel can be
assigned to both the up and down parameters to vary the tempo up
and down from a single controller. MIDI Controller values are added
to the Global Tempo with an offset range of
±
64. When the controller
is set to zero (off) the tempo returns to its original setting. This con-
troller is only recognized on MIDI channel 16, unless Planet Phatt is in
Omni mode, in which case all channels are accepted. This control has
no effect when External Clock is being used.
TEMPO CONTROL
up:pwh down:pwh
• Retrigger
The Retrigger function creates a “stuttering” effect by resetting the
sample start point and envelope generators to their starting point
every time a trigger is received. The rate of retriggering is based on the
Global Tempo which is divided down by the Retrigger Rate parameter.
A MIDI continuous controller (0-31 or Mono Pressure) can also be
assigned to control the Global Tempo divisor. Set the rate parameter
to “Off”␣ to disable retriggering.
RETRIGGER
ch:01 rate:1/16
The following Retrigger divisors are available:
Dbl
- Double Whole Notes
Dbl T
- Double Whole Note Triplets
Whole
- Whole Notes
Whl T
- Whole Note Triplets
Half
- Half Notes
Half T
- Half Note Triplets
1/4
- Quarter Notes
1/4 T
- Quarter Note Triplets
1/8
- Eighth Notes
1/8 T
- Eighth Note Triplets
1/16
- Sixteenth Notes
1/16 T
- Sixteenth Note Triplets
1/32
- Thirty-second Notes
1/32 T
- Thirty-second Note Triplets
1/64
- Sixty-fourth Notes
1/64 T
- Sixty-fourth Note Triplets
••• When Tempo Control is
being used, the last setting of
the MIDI controller remains
in effect when a new Beat is
selected.
••• When a MIDI controller
is used to control Retrigger,
the last setting of the MIDI
controller remains in effect
when a new Preset or Beat is
selected.
▼
When the Global Tempo is
set to “External”␣ , the 1/64th
note divisor is not possible.
1/64 T will be substituted,
even though the display
reads 1/64.
▼
When the Global Tempo is
set to “External”␣ , the Tempo
Control parameter will not
have any effect.
Summary of Contents for Planet Phatt
