MK-6 Operation Manual
95
MIDI Menu
Receive Program Change
Because the MIDI Enable function only makes sense if you are in Multi
mode, MK-6 disables this feature when in Omni or Poly mode.
Receive Program
Change
Use this function to instruct MK-6 to utilize or ignore incoming MIDI
preset changes or Bank Select commands for each channel. Use the cursor
buttons to select the channel number field, then use the data entry control
to select a channel number. Use the cursor button again to select the On/
Off field and the data entry control to change the value.
MIDI Program
Change -> Preset
You can also remap incoming MIDI program changes to a different
numbered preset. This is a handy feature when your master keyboard
cannot send a bank change or you want to reorder preset numbers. Any
preset can be mapped to any incoming MIDI program change number.
For example, you could set up the Program -> Preset map to call up preset
#12 whenever MK-6 receives MIDI program change #26.
The four fields shown below are editable.
The Program->Preset
Change only works for program
changes received in Bank 0.
channel 16: On
MIDI ENABLE
In Multi
Mode
(using Omni mode)
MIDI ENABLE
In Omni
Mode
RECEIVE PROGRAM CHANGE
channel 01 : on
MIDI PROG CHNG -> PRESET
000 User 000
0
Incoming Program
Change in Bank 0
ROM Bank
Program No.
Bank No.