User’s Guide
23
System Menu
MIDI CC
- Allows you to assign MIDI Continuous Controller numbers
to the data slider so it can be used as a performance control. After selecting
a CC channel, the slider will send data to the internal synthesizer
as well as
sending MIDI CC data messages to an external MIDI synth or computer
application.
You can control these internal synthesizer parameters using the data slider.
Parameter
MIDI Controller No.
Pan
10
Release
(only)
72
Decay
(only)
75
Global Aftertouch On/Off
85
Local Control On/Off
122
To Control Pan using the Data Slider:
►
Press the
1.
Select
button until
CC Assign
is selected.
Use the
2.
Data Slider
to select the MIDI controller number:
10
(Pan).
Press the
3.
Select
button repeatedly until none of the select LEDs are
lit.
Move the
4.
Data Slider
to adjust the
Pan
position.
MIDI Chn
Allows you to set the MIDI channel for the keyboard. Keyboard and
controller data will be transmitted on this channel.
If
Split Mode
is selected, the MIDI channel will be set for the currently
selected section (upper or lower). The upper and lower sections can each
transmit on a different MIDI channel.
(In either Split or Layer mode.)
To Select a MIDI Channel:
►
Press the
1.
Select
button repeatedly until the MIDI Chn LED is lit.
Select the desired MIDI Channel
2.
using the data slider.
Press
3.
Select
to exit the menu.
LongBoard Guide EN prep.indd 23
9/21/2009 10:25:40 PM
Summary of Contents for LONGboard61
