32
E-MU Systems
Multisetup
Multisetups
þ
To Modify a Parameter
Press either Cursor button repeatedly (or hold down the left or right cursor
button while turning the Data Entry Control) until the cursor is below the
desired parameter value. Rotate the Data Entry Control to change the value.
þ
To Return to the Main Screen
Press the Multi button, turning off the LED.
Restoring
Multisetups
B-3 contains 64 Multisetup locations. These are all User locations which
you can use to store your own Multisetups.
Multisetups can also be restored using a MIDI Bank Select command.
Select: cc00 = 80, cc32 = 00,
(dec) then send a
Program Change
command
corresponding to the Multisetup you wish to select.
þ
To Restore (Select) a Multisetup:
1.
Press the Multi menu button lighting the LED. The Multi menu screen
displays the menu page most recently selected since powering up B-3.
The cursor appears below the first character of the screen heading on
line one.
2.
Go to the “Restore Multisetup” screen (shown above) using the Data
Entry Control. This is the first screen in the menu.
3.
Press either cursor button to move the cursor to the bottom line of the
screen.
4.
Now, use the Data Entry Control to select a Multisetup. The Enter LED
will be flashing.
5.
Press the Enter button to load the selected Multisetup.
þ
To Save a Multisetup:
1.
Set the Preset, Volume, Pan settings the way you want them for all 16
channels. Set the Master menu parameters the way you want them.
2.
Press the Multi menu button lighting the LED.
RESTORE MULTISETUP
003 Jazz Encounter
Summary of Contents for B-3
Page 1: ...64 Voice Tone Wheel Organ OPERATION M A N U A L ...
Page 136: ...128 E MU Systems Edit Menu Play Solo Layers ...
Page 148: ...140 E MU Systems Programming Tutorial Linking Presets ...
Page 170: ...162 E MU Systems Save Copy Menu Copying Information ...