4 из 6
USER MANUAL
Please mind, that the device will show maximum humidity level of the
layer available for the sensor. The objectivity depends on the depth the
sensor is placed at. In this case the device displays the humidify level
where middle and lower layers border.
The lower layer is the moistest. At the beginning, when the root system is
not developed, it is recommended to water plants in grow bags more often,
but doses should be less.
This position of the sensor will display the humidity level of the 3rd layer.
Mind it when setting the parameters. Do not set minimal humidity level
when watering mode operates if the sensor is in the lower (moistest) layer.
It will lead to over-drying.
And vice a versa, do not set maximum humidity level when watering mode
operates if the sensor is in the surface (driest) layer. It will lead to
overwatering.
Optimal way: sensor is placed into the 2nd layer, humidity level is about
60-70%, when watering mode starts operating.
Made in a lab
E-Mode.pro
www.E-Mode.pro
Made in a lab
E-Mode.pro
www.E-Mode.pro
