E-LOK 9-Series, User Manual, Page: 9 / 40

Turn lock upside down
Push latch into lock case
Holding latch in lock case, turn 180 degrees
Release latch to full extended position
To reverse the Mortice Lock:
To turn the handing on the front panel, loosen the inner screw.
Remove the handle.
After adjusting the direction of the handle, insert it into the handle seat, re-
tighten the inner screw and ensure arrow is pointing in the direction of the
handle (above image).
Check the inner-screw is tight before moving onto the rear panel.
Complete the same process for the rear handle. Ensure inner screw is tight
when re-attaching handle to the panel. It is recomended to apply Loctite to the
handle screw.
8
Adjusting the Handing:
Location of screw shown:
Flip Lock
Press latch
tongue in &
rotate
9 - S e r i e s