E-Lins E481v Series Router User Manual
E
‐
Lins
Technology
Co.,Limited
Add:
Bld22.,
Longxi
Garden,
Nonglin
RD.,
Futian
District,
Shenzhen,
518000,
China
Tel:
+86
‐
755
‐
83700465
E
‐
mail:
www.szelins.com
Chapter3
3 Getting Started
3.1 Panel introduction
Power supply interface:
DC5V-25V power supply (5V or 12V suggested), Please the fixed necessary
power supply of connection product is ensured voltage and the current parameter
of power supply if customer exchanges with other power supply. Special attention:
If customer has changed the power supply, sometimes can because of twinkling
the current ability and leads to Router product reboot inadequately
Ethernet interface:
Can recognize voluntarily crosses or the straight networking winding thread, and
consult 100M voluntarily and 10M's network speed merit ability
Antenna interface:
standard SMA antenna interface
3.2 The LED State
In order to know state of module there are four LED lamps, Online, Run, LAN and Cell altogether, and among
them, the concrete explanation is as follows to the different states of pilot lamp representative:
Online
Blink
Winked
Online
Connected data transmission
after got the IP when it light on
Failed to connect or
data transmit when light
off.
Run
show the state of initialization
system with others when the
equipment is started
Run normally and Data
transmitting when it’s lighting...
LAN
Ethernet links normal when it
light on
Data transmitting by Ethernet
interface when lighting
None Ethernet connects
Cell
Module wok normally
The system work LED state explanation
