C100 Series IP Camera User Manual
E-Lins Technology Co.,Limited
Tel: +86-755-83700465 E-mail: [email protected] www.szelins.com
image interval(second).
4.4.10. Alarm Service Settings
As shown below, there are two modes of alarm trigger, first one is motion
detection, pleas refer to below interface, the sensitivity of motion detection can
be adjusted according to the users
′
requirement, the higher the number is, the
lower sensitivity is; Another mode is input alarm, when connected, it triggers
alarm through alarm input signal which connects to linkage alarm GPIO;
When triggered, there are 3 alarm modes:one is IO alarm linkage, camera
connects with linkage alarm box through GPIO, sound the siren
;
the second is
email notification, send email with images captured
;
The last is upload pictures
alarm, as the way mentioned before FTP upload pictures alarm, Upload
pictures interval (second) keeps consistent with the mentioned upload pictures
interval of Ftp service settings.
The schedule refers to arming time, as the selected time interval: 0:00 minute
per week to 0:45 minutes and Monday 1:00 hour and 2:00 hour.
4.4.11. Reset/Firm Ware Upgrade
This sector is for camera firmware upgrade, it includes device system
firmware and device application firmware. Be cautious to apply for it!