29
Perform a Spirometry Test
After subject’s profile is entered, now the device is ready to make a spirometry
test. Press start button will lead you to FVC testing page by default.
When a test is being performed the display will show the real time Flow/Volume
curve or the Volume/Time curve.
WARNING:
The device must only be used by qualified personnel with
complete knowledge of spirometry tests; this is important for the correct
execution of the tests, for the acceptability of measured parameters as well
as for the correct interpretation of results.
WARNING:
The spirometer captures and presents data reflecting a subject’s
physiological condition. When reviewed by a trained physician or clinician,
this data can be useful in determining a diagnosis. However, the data should
not be used as a sole means for determining a subject’s diagnosis.
WARNING:
To minimize chances of a misdiagnosis, it is the physician’s
responsibility to assure that pulmonary tests are properly administered,
evaluated, and interpreted.
WARNING:
People may become lightheaded, dizzy, or even faint during a
spirometry test. Watch subjects closely. If they choose to stand during
testing, keep a chair immediately behind them. If there is any reason for
concern, stop the test and take appropriate action.
WARNING:
During a spirometry test all the parameters are measured at BTPS
conditions (Body Temperature and Pressure, Saturated).
3.1 Prepare a Patient
The accuracy of a spirometry test is highly dependent on the subject's
understanding and cooperation. Hence it is recommended to explain the entire
procedure for the type of effort which is expected to be performed. Remind
subjects that the test is painless. Demonstrate at least one effort for the subject
for all different breathing maneuvers.
WARNING:
Make sure all the accessory items are correctly connected to each
other, mouth piece side must face the subject. Make sure battery is charged.
Always check the interior of the flow transducer to ensure that no foreign
objects are present.
