11
1.
Unpack
UBREATH® PRO
Spirometer System, check if all components are in
good condition.
2.
Connect the controller cable to
UBREATH® PRO
Spirometer System main
body until hearing the click which indicates that it has been correctly
inserted
3.
Connect the other end to the remote sensor controller, again the click will
indicate the correction of insert.
4.
The flow transducer usually comes with a transparent sterilized bag. Tear
the bag and take out the flow transducer then insert the flow transducer
into the ports which are located on the head top part of the device. The
sound of a click will tell that insertion is complete and correct.
5.
For hygiene reasons, do not touch the mouthpiece throughout the process.
WARNING:
1.
Use only parts and accessories supplied with the device and available
through
e-LinkCare
. The use of accessories other than those specified
may result in degraded performance of the device.
2.
Verify that there’s no foreign bodies present inside the transducer
sensor. The insert direction of the transducer must be inserted vertically
like the picture shown above.
3.
Do not use if the bag is leaking, damaged or the item inside.
