eLineTechnology.com
8
enabled/disabled by the menu.
Backlight Compensation (BLC):
If a bright backlight is present, the subjects in the picture may
appear dark or as a silhouette. Backlight compensation (BLC) enhances objects in the center of the
picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source
outside of this area, it will wash out to white. The camera will adjust the iris so that the object in the
sensitive area is properly exposed.
White Balance (WB):
This feature automatically processes the viewed image to retain color balance
over a color temperature range. The default setting for white balance is AUTO.
Support 4 preset cruise scanning:
It can be added 32 presets in every cruise scanning
Pattern:
A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions that can
be recalled with a command from a controller or automatically by a configured function (alarm, park,
time task, or power-up). By default the focus and iris are in auto status during the pattern is being
memorized.
Power Loss Position:
The dome supports the power loss position capability with the predefined
dwell time. It allows the dome to resume its previous position after power is restored.
Patrol:
The high speed dome provides up to 8 patrols. In each patrol, user is allowed to specify the
scanning track by a group of user-defined presets, with the scanning speed between two presets
and the dwell time at the preset separately programmable.
Alarm Response Action:
The speed dome supports 4 alarm inputs which can be set to NO
(normally open), NC (normally closed). Upon having received the alarm input signal, the dome will
automatically activate a user-defined action, which can be programmed to patrol, pattern or preset
call up.
AUX Output:
An auxiliary output is a configurable signal from the dome back box that can trigger
another device to operate. The dome provides 1 auxiliary outputs: AUX1. The auxiliary output type
can be set to NO or NC by menu. And the alarm dwell time is configurable as well.
Timing Tasking:
The speed action can be preset in some period, in including: preset 1-8, pattern
1-8, cruise 1-8, Pan scanning...etc.
Zone Function:
It including Zone function operation, Zone name setting, Zone action,Zone Setting,
and Zone delete. Zone action: When the camera stop in some zone without any command for more
than 4 min, the Pan&Scan will be enabled in this zone.
Code Protection:
Right code must be input for following speed dome configuration
Compass Function:
It is display the specific location. The zero azimuth is regarded as North in
general rule.
