e-Line Technology ELI-SIP2-APTZ8-R30X, Manual

Page: 8 / 42

1
1 IR INTELLIGENT SPEED DOME INSTALLATION
1.1 Installation Preparation
Basic Requirement

All installation and operation here should conform to your local electrical safety codes.

Before installation, please open the package and check all the components are included.
Please make sure the speed dome installation environment and installation mode can meet
your requirement. If there is special requirement, please contact your local retailer for more
information.

We assume no liability or responsibility for all the fires or electrical shock caused by
improper handling or installation.
Check installation space and installation location intension
Please make sure the installation environment has enough space to install the speed dome and
its corresponding bracket.
Please make sure the ceiling, wall and the bracket can support the speed dome and its
corresponding installation component. It shall sustain the 8X weight of the speed dome. Please
notice that the installation height should be more than 6m if it is a laser speed dome.
About cable
Please select the cable according to your transmission distance.
The minimum video coaxial-cable requirement is:

75 ohm.

Full cable with copper conductor

95% knitted copper shield
International Model Max Distance
(Ft\M)
RG59/U 750ft (229m)
RG6/U 1,000ft (305m)
RG11/U 1,500ft (457m)

Please refer to appendix 2 for more information about RS485 communication cable.
Select proper power supply cable according to transmission distance
Refer to appendix 3 for 24VAC power supply device.
Refer to appendix 4 for 12VDC power supply device.
Please keep all package material well for future use
Please keep speed dome package material well in case you need to send it back to your local
retailer or manufacturer for maintenance work.
Non-original package material may result in device damage during the transportation.