51
In the Windows OS, From Start->Control Panel->Add or remove programs. Click the “Add/Remove
Windows Components” and then select the “Network Services” from the Windows Components Wizard.
Click the Details button and then check the “Internet Gateway Device Discovery and Control client” and
“UPnP User Interface”. Please click OK to begin installation.
Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the network camera can auto
detect it via the “My Network Places”.
Under manual mode, you can modify external port. Under auto mode, select idle port for auto port
mapping without user modification.
Figure 5- 26
5.2.8 SNMP
The SNMP interface is shown as in
28.
The SNMP allows the communication between the network management work station software and the
proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or
establish the SNMP service before you use this function. You need to reboot the device to activate the
new setup.
Summary of Contents for ELI-IP5-VD31-312MR
Page 9: ...5 Figure 1 7...
Page 42: ...38 Figure 5 10 Figure 5 11...
Page 64: ...60 Figure 5 37 Figure 5 38...
