12
3
CORNER MOUNT BRACKET
3.1
Component Installation
Corner mount bracket and its components are shown as below. See Figure 3-1.
Figure 3-1
3.2
Installation
3.2.1 Installation Requirements
The corner mount speed dome can be installed in the hard construction wall in the indoor or
outdoor environments where there is a 90 degrees angle. Before the installation, please make
sure:
The wall is thick enough to install the expansion bolt.
The wall can at least sustain the 8x weight of the speed dome.
3.2.2 Installation Steps
Step1: Install corner mount bracket.
Please draw four holes position in the wall according to the holes of the corner installation
accessories. See Figure 3-2.
Figure 3-2
Step 2: Speed dome installation
For detailed information, Please refer to chapter 1.6.
After the installation, it is shown as in Figure 3-3.
Installation holes
Summary of Contents for ELI-IP5-APTZ21S-30XR
Page 3: ...iii 7 4 RS485 Bus FAQ 20 8 APPENDIX SAFETY ROPE INSTALLATION 21...
Page 20: ...13 Figure 3 3...
Page 22: ...15 Figure 4 3...