11
FOLDING INSTRUCTIONS
FRAME
The frame locking lever is located in the mid portion on the right side of the frame. To unlock the lever and fold the frame,
slide the bottom lock towards the front of the bike and simultaneously pull the silver locking lever away from the frame.
When unfolding the frame, push the lever against the frame until the lock clicks and secures the frame.
WARNING! When unfolding the frame and locking the lever, always make sure the internal wires are out of the way!
PEDALS
Fold the pedals by pressing the end of the pedal inward and then upwards or downwards.
FOLDING PIPE
To unlock the pipe and fold it, locate the locking lever at the base
of the pipe. (1) Slide the safety clip ring out and away from the
lever; (2) pull the locking lever out and down towards the floor.
Complete the action by folding the pipe down at the hinge.
When unfolding the pipe, (1) unfold the pipe and align it with the
base. (2) Align the silver bolt with a round notch on the inner side
of the latch. (3) Pick up the lever and push it against the pipe until
it is safely locked. (4) Complete the action by inserting the safety
clip ring into or around the lever.
COMPLETE BIKE FOLDING PROCEDURE: 1) turn off the LCD, 2) fold kickstand along the frame; 3) fold both pedals, 4) lower
seat post to minimum or remove it completely, 5) fold handlebar folding pipe along front wheel, 6) fold frame, 7) stand bike on
stand (located under the bottom bracket/pedals), 8) (optional) use bungee cords to secure the bike from unfolding.
Summary of Contents for EPIK SWAN
Page 5: ...2 SIZING...
