e-Joe ANGGUN, User Manual

Page: 16 / 21

16
Battery Precautions

Do not touch the two poles of the battery with your hands when the battery is removed for charging.
The two battery poles should not be touched with any other metal or other material that conducts
electricity.

While charging, put the battery in a secure place where children cannot reach it.

Do not use any other charger other than the one that came with your electric bike. If you need another
charger, contact your local dealer or e-JOE Bicycle.

Do not attempt to open or repair your charger. The electronics contain high pressure circuits, so do not
dismantle it by yourself.

Prevent liquids, metal, and metal fillings from permeating the charger, and be careful to not drop or hit
the charger causing it to become damaged.

Do not put anything on top of the charger while charging; it must be well ventilated to allow the heat
generated to dissipate.

When charging, if there is a peculiar smell or the charger gets too hot to touch, please stop charging
immediately.

To prevent premature failure of your battery and for your warranty to remain in effect on your battery,
it is RECOMMENDED that you charge and discharge your battery at least once per month. Do NOT use
your battery in a very low state.

It is normal for distance range to reduce as a result of low temperatures.

While carrying the charger, DO NOT bump, drop, or damage the charger, or it may result in failure.

Avoid any contact with water while charging your battery. If a plug or socket becomes wet, dry it
completely before using it.