Settings and Default Values
To get to settings hold down the 3 buttons [ (+), (power), (-) ] together, until you get
into the mode settings.
Press (+) or (-) to change the setting parameter.
Press (power) to go to the next mode level of the parameter.
●
P01: Backlight Brightness
○
(1) Darkest (2) Medium [
Default
] (3) Lightest
●
P02: Distance Unit
○
(0) Kilometers [
Default
] (1) Miles
●
P03: Voltage Grade
○
24V 36V 48V
●
P04: Sleep Time
○
(0) Don’t Sleep (1)-(60) Unit Minutes (10) [
Default
]
●
P06: Wheel Diameter
○
(10) [
Default
]
●
P07: Speed Magnetic Steel Number
○
(30) [
Default
]
●
P09: Zero Start and Non-Zero Start Up
○
(0) Zero Start [
Default
] (1) Non-Zero Start [You want to use this mode]
●
P12: Starting Torque
○
(0) Weakest (1)-(4) Mid Range (5) Strongest [
Default
]
●
P14: Controller for limiting value setting default
○
(12) [
Default
]
●
P15: Maximum Speed set to Low Gear Vehicle
○
(40) [
Default
]
To exit from settings, go to ODO mode, then hold (-) for 3-5 seconds to exit.
11
