9
SETUP
Window PASSWORD is 1234
The password protected SETUP Window provides control over the following features:
1. Specify which control BUTTONS are available on the PowerScan TOOLBAR.
2. Specify the ORDER of the BUTTONS on the PowerScan TOOLBAR.
3. Specify the save-to location of SCANS (DRIVE #1 and DRIVE #2).
4. Specify the fi le name PREFIX.
5. Specify the fi le FORMAT that is used when a scan is made.
6. SHOW or HIDE the ROLL FILM CONTROL for motorized fi lm carrier.
7. SHOW or HIDE the SAVE AS Window when scanning.
8. Specifi es INCHES or MILLIMETERS.
9. Specify FIT TO PAGE size.
10. ENABLE or DISABLE Print Offset.
Toolbar:
Specifying which control BUTTONS appear on the PowerScan Toolbar.
The control button names are listed in two columns titled AVAILABLE CONTROLS and SELECT-
ED CONTROLS as shown on the SETUP Window, Fig 2. The SELECTED CONTROLS list speci-
fi es which controls are shown on the PowerScan TOOLBAR. The AVAILABLE CONTROLS list
specifi es which control buttons are NOT shown on the PowerScan TOOLBAR
A. To add a control button to the PowerScan Toolbar, highlight the control button name on the
AVAILABLE CONTROLS list by clicking on it and then CLICK the ADD button located between
the AVAILABLE CONTROLS list and SELECTED CONTROLS list.
B. To delete a control button from the PowerScan Toolbar, highlight the control button name on
the SELECTED CONTROLS list by clicking on it and then CLICK the DELETE button located
between the AVAILABLE CONTROLS list and SELECTED CONTROLS list.
The order of the control buttons on the PowerScan toolbar is determined by the order
of the control button names
shown on the SELECTED
CONTROLS list. To change
this order, highlight a control
button name and CLICK the
“+” or “-” below the SELECTED
CONTROLS list.
PowerScan SETUP MENU
Fig 2
