Time factor
Acceleration
1
.
2
.Click to set the time and acceleration.
OR
In the Define interface, please set A-B trace at first.
For REC( trace record), please use controller to make it.
REC:choose the trace ID that you want to run,
and then set time and acceleration.
3
.
Click " " after camera back to Begin A, then
click " "
4
.
If you want to show the movement repeatly, please
use " ".
1
.
Please
refer to “Motus”Page
4
.
Note 1: Rec-trace records only can be finished by wireless remote CONTROLLER(optional).
Please choose trace number on your APP to continue your following operations
Zoom: please input the number of extra length, or click + /- to
adjust it.
Slider : please input the number of extra length, or click + /-
to adjust it.
Pan:
please input the number of extra degree, or click + /-
to adjust it.
Tilt: please input the number of extra degree, or click + /- to
adjust it.
Target mode
Init.
submit
loop demo
: Let the camera back to the Begin point A
: make the camera take pictures according to set
: stop movement of camera
Set
Preview
Init.
2
.
In time-lapse interface, please set the shooting number,
exposure time,end date and time, the percentage of
the waiting time and movement time.
Click " ", you could check the shooting process.
Click
, you could cancel the current operation.
" "
3
.
Click the
” “
,let the camera move back to the
beginning point A , and then click
, make
the camera shoot according to the parameters that
you set up.
” “
Init.
monitor
stop
No need to
be set. System will
be changed automatically.
Note 2: Rec-trace records only can be finished by wireless remote CONTROLLER(optional).
Please choose trace number on your APP to continue your following operations
Note 3: APP exposure time set should follow the following rules:
When camera is under M mode, the APP exposure time should be longer than the camera
exposure time. For example, camera exposure time is 1/100 s, at this time
the App exposure time should be equal or longer than 1/80 s.
When camera is under B mode, the real exposure time is decided by APP, now,there is
no special requirement for App exposure time.
1
2
1: At first, please make sure the shutter and cable is connected correctly.
Second,
please make sure the channel of shutter is same as motor, PTZ.
Note
submit
2016 EIMAGE ALL RIGHTS RESERVED
21
22
2016 EIMAGE ALL RIGHTS RESERVED
