Guillotine Super D Pipe Saw User’s Manual
18
Part No. 06-150-510-MAN, Rev. 0-0607
E.H. Wachs Company
Positioning the Saw
1.
Attach a lift to the lift hooks at the top of the frame. If
you will be setting up the saw vertically (cutting a hor-
izontal pipe), you can lift it into place using just the
two lift hooks.
Figure 5-2. There are two lift hooks at the top of the
saw frame.
CAUTION:
Before
cutting with the
saw, make sure
you remove the
lifting strap from the frame—
after clamping the saw in
place. Keep the lift attached
to the lift hooks.
CAUTION:
Make sure the lift
strap does not bind against
the saw blade or the oscillat-
ing bow.
2.
If you will be using the saw in a horizontal or angled
position (cutting a pipe that is not horizontal), you will
need to attach lift straps to the other end of the saw
frame, as illustrated in Figure 5-3. Adjust the length of
the strap to hold the saw at the required angle.
Figure 5-3. If you are positioning the saw horizontally
or at an angle, use the lift hooks and also attach lift
straps around the frame at the locations shown.
