25
E-flite T-34 Mentor ARF Assembly Manual
General Maintenance
Required Parts
Fuselage
Required Tools and Adhesives
Phillips screwdriver: #1
Hex wrench: 2.5mm
1. Use a #1 Phillips screwdriver to remove the two screws
that secure the spinner cone to the spinner backplate.
2. Check that the propeller adapter is tight using
a hex wrench or screwdriver that fits into the hole
in the adapter. You will turn this nut counterclockwise to
loosen or clockwise to tighten.
3. To check that the motor is secure to the firewall, you
will first need to remove the spinner. Use a 2.5mm hex
wrench to remove the four screws that secure the cowling
to the fuselage.
