11
E-flite T-34 Mentor ARF Assembly Manual
4. Slide the fin fully into position. Use two 3mm washers
and two 3mm locknuts to secure the fin. Tighten these
nuts down using an adjustable wrench.
5. Align the control horn so it is 90 degrees to the rudder
as shown.
6. Center the control horn vertically in the slot on the side
of the fuselage. Use a #2 Phillips screwdriver to tighten
the black screw against the rudder control rod. Use
threadlock on the screw to prevent it from vibrating loose.
