Step 1.
Check that all control functions move in the correct
direction. If not, use the respective reversing switch to correct
the direction.
Step 2.
Check that each clevis is securely snapped into
position. Be sure to use the clevis locking devices (small
pieces of tubing slipped over the clevis to hold the clevis
closed and prevent accidental opening in flight).
Step 3.
Check that all servo horn screws are tight.
Step 4.
Charge the transmitter and receiver batteries per the
instructions included with the radio system.
Step 5.
Range check your radio system per the manufacturer's
instructions.
18
Elevator
Elevator
Section 10: Preflight Checks
Rudder
Rudder
