1
E-flite Extra 260 480 ARF Assembly Manual
3. Slide the aileron into position. Check to make sure
it can move without interference at the wing root and
wing tip. Remove the T-pins and apply Thin CA to each
hinge. Make sure the hinge is fully saturated with CA.
Use a paper towel to clean up any excess CA from the
wing and aileron. Make sure to apply CA to both sides
of the hinge.
Note
: Placing a #11 hobby blade between the aileron
leading edge and wing trailing edge to position the
aileron will result in a nice free moving hinge for 3D
throws without any binding.
4. Firmly grasp the wing and aileron and gently pull on
the aileron to ensure the hinges are secure and cannot
be pulled apart. Use caution when gripping the wing and
aileron to avoid crushing the structure.
