E-FLITE EFLH3000 Instruction Manual Download

Page: 1 / 24

EFLH3000

E-flite

products are distributed exclusively by

Horizon Hobby, Inc.

4105 Fieldstone Road

Champaign, IL 61822

USA

US patent D578,146

US patent number 7, 391, 320

Multiple patents pending

Horizon Hobby UK

Units 1-4 Ployters Rd

Staple Tye

Harlow, Essex

CM18 7NS

United Kingdom

Horizon Hobby Deutschland GmbH

Hamburger Strasse 10

25335 Elmshorn

Germany

DSM and DSM2 are trademarks or registered trademarks of Horizon Hobby, Inc.

The Spektrum trademark is used with permission of Bachmann Industries, Inc.

Spektrum radios and accessories are exclusively available from Horizon Hobby, Inc.

E-fliteRC.com

15762

Printed 6/09

Specifications

Length . . . . . . . . . . . . . . . . . . . . 7.5 in (190mm)

Height . . . . . . . . . . . . . . . . . . . . 3.5 in (90mm)

Main Rotor Diameter . . . . . . . . . 7.0 in (180mm)

Weight with Battery . . . . . . . . . . 1.0 oz (28 g)

Main Motor . . . . . . . . . . . . . . . . Coreless (1 installed)

Tail Motor . . . . . . . . . . . . . . . . . Micro coreless (1 installed)

Battery . . . . . . . . . . . . . . . . . . . 120mAh 1-cell 3.7V 14C battery Li-Po (2 included)

Charger . . . . . . . . . . . . . . . . . . . Celectra

™

4-port 1-cell 3.7V 0.3A DC Li-Po charger

(included)

Power Supply . . . . . . . . . . . . . . . 6V, 1.5-amp AC/DC power supply (included)

Transmitter . . . . . . . . . . . . . . . . MLP4DSM 2.4GHz DSM 4-channel (included)

Onboard Electronics . . . . . . . . . . 5-in-1 receiver/servos/mixer/ESC/gyro (installed)

RTF Instruction Manual

Note: Attempting to fly the helicopter without completely reading the manual

may cause injury to yourself and people in the vicinity, as well as damage to

the helicopter.

Summary of Contents for EFLH3000

























Search results

Summary of Contents for EFLH3000

Reviews:

Related manuals for EFLH3000

Brands by name

Popular brands

E-FLITE EFLH3000, Instruction Manual

Search results

Summary of Contents for EFLH3000

Reviews:

Related manuals for EFLH3000

Brands by name

Popular brands