7. Insert the 'hex to round' adapter onto the shaft.
Then, slide the 6mm washer included with your
gearbox onto the output shaft.
8. Slide the propeller onto the gearbox shaft. Slide
the spacer included with the spinner onto the
gearbox shaft in front of the prop as needed.
Note
: Two spacers have been provided that
are placed between the propeller and spinner
backplate. Use the thin spacer for low-pitch
propellers, the thick spacer for high-pitch
propellers. This will prevent the blades of the
propeller from contacting the spinner backplate.
41
Summary of Contents for Brio 10 ARF
Page 1: ...Brio 10 ARF Assembly Manual...
Page 53: ...Notes 53...
