Note
: Two spacers have been provided that
are placed between the propeller and spinner
backplate. Use the thin spacer for low-pitch
propellers, the thick spacer for high-pitch
propellers. This will prevent the blades of the
propeller from contacting the spinner backplate.
5. Slide the spinner backplate onto the gearbox
shaft. Slide the propeller ontot he shaft then
secure the propeller and spinner backplate
using the supplied aluminum prop adapter cone.
Note
: It is very important that you check to be
sure the propeller is balanced before installing
onto the shaft. An unbalanced propeller will
cause performance issues. Some propellers will
need the center hole drilled out to fit the shaft
size of your outrunner. It is very important the
hole is drilled concentric or it can cause the
propeller to be unbalanced.
6. Snap the spinner cone onto the
spinner backplate.
40
Summary of Contents for Brio 10 ARF
Page 1: ...Brio 10 ARF Assembly Manual...
Page 53: ...Notes 53...
