3. Attach the clevis to the 5
5
/
8
" (143mm)
pushrod wire. Thread the clevis onto the pushrod
wire at least 12 turns.
4. Attach the clevis to the control horn. Plug the
aileron servo into the receiver and turn on the
radio. Center the aileron servo electronically. Use
a felt-tipped pen to mark the pushrod wire where
it crosses the servo horn.
Hint:
.Use.painter’s.tape.to.tape.the.aileron.
to.the.wing.tip..This.will.hold.the.aileron.in.
the.centered.position.while.you.prepare.the.
pushrod.wire.
19