background image

 

7

CARE AND MAINTENANCE 

 

 

ALWAYS  turn  the  heater  OFF  and  unplug  the  power  cord  from  the  outlet  before 
cleaning,  changing  the  light  bulbs,  or  moving  this  stove.  Failure  to  do  so  could  result  in 
electric shock, fire, or personal injury

 

NEVER immerse in water or spray with water. Doing so could result in electric shock, 
fire, or personal injury. 

CLEANING  

Metal: 

Buff using a soft cloth, slightly dampened with a citrus oil-based product. 
DO NOT use brass polish or household cleaners as these will damage the metal.  

Glass: 

Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth.  
NEVER use abrasive cleansers or any cleaner that could scratch the surface. 

Plastic:  Wipe with a slightly damp cloth and a mild solution of dish soap and warm water. 
Vents: 

Use a vacuum or duster to remove dust and dirt from the heater and vent areas.  

MAINTENANCE

 

 

 

Risk  of electric  shockDO  NOT  OPEN  the  main  panels! No  user-serviceable  parts 
inside!
  

Storage: 

  Store heater in a clean dry place when not in use. 

Electrical and Moving Parts: 

  The  fan  and  motors  are  lubricated  at  the  factory  and  will  not  require  lubrication  for  the  life  of 

the stove. 

  Except for the light bulbs, all electrical parts and components are integrated into the heater and 

are not serviceable by the consumer. 

Light Bulb Inspection and Replacement:  
The flame effect is created by two 40-Watt light bulbs with an E-12 (small) socket base. Use only this 
same  type  of  bulb  as  a  replacement.  If  the  flame  effect  does  not  work,  the  bulbs  may  have  come 
loose or been damaged during shipping.  

 

Light bulbs become very hot during use. Allow at least 10 minutes for the bulbs to 
cool before touching.
 

To inspect or replace the bulbs, first unplug the power cord from the outlet. Locate the access panel 
on  the  back  of  the  stove.  Remove  the  screws  and  the  panel.    Check  the  bulbs  to  be  sure  they  are 
finger tight  and  in  working  order.  Replace  any  damaged or faulty  bulbs.  Reattach  the access  panel. 
Do not operate this heater without the access panel in place. Do not remove the back cover. There 
are no serviceable parts inside. 

 

 

Summary of Contents for EFS-XB24B









Reviews: