E+E Elektronik EE300Ex, User Manual

Page: 37 / 56

37
User Manual EE300Ex Humidity / Temperature Sensor
11 FM Certificate USA
To verify the availability of the Approved product, please refer to www.approvalguide.com
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals LLC. 1151 Boston-Providence Turnpike, Norwood, MA 02062 USA
T: +1 (1) 781 762 4300 F: +1 (1) 781 762 9375 E-mail: information@fmapprovals.com www.fmapprovals.com
F 347 (Mar 16) Page 1 of 7
CERTIFICATE OF CONFORMITY
1.
HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL EQUIPMENT PER US REQUIREMENTS
2. Certificate No: FM17US0302X
3. Equipment:
(Type Reference and Name)
EE300Ex-series
Humidity and Temperature Transmitter
4.
Name of Listing Company: E+E ELEKTRONIK Ges.m.b.H
5. Address of Listing Company: Langwiesen 7
Engerwitzdorf 4209
Austria
6. The examination and test results are recorded in confidential report number:
3049300 dated 2 nd October 2017
7. FM Approvals LLC, certifies that the equipment described has been found to comply with the following Approval
standards and other documents:
FM Class 3600:2011, FM Class 3610:2015, FM Class 3611:2016, FM Class 3810:2005,
ANSI/ISA 61010-1:2012, ANSI/ISA 60079-0:2013, ANSI/ISA 60079-11:2014, ANSI/IEC 60529:2004
8. If the sign ‘X’ is placed after the certificate number, it indicates that the equipment is subject to specific conditions
of use specified in the schedule to this certificate.
9. This certificate relates to the design, examination and testing of the products specified herein. The FM Approvals
surveillance audit program has further determined that the manufacturing processes and quality control
procedures in place are satisfactory to manufacture the product as examined, tested and Approved.
10. Equipment Ratings:
Intrinsically Safe for Class I, II, III Division 1, Groups A, B, C, D, E, F, and G hazardous (classified) locations in
accordance with drawing M1_1309080, Nonincendive for Class I, II, III Division 2, Groups A, B, C, D, E, F,
and G hazardous (classified) locations, Intrinsically Safe for Class I, Zone 0, Group IIC hazardous (classified)
locations in accordance with drawing M1_1309080, Intrinsically Safe for Class II and III, Zone 20, Group IIIC
hazardous (classified) locations in accordance with drawing M1_1309080, IP65 with an ambient temperature
Certificate issued by:
17 September 2019
J. E. Marquedant
VP, Manager, Electrical Systems
Date