5
|
ENGLISH
3.
Enter “http://ecentre” in the address bar of your web browser and press the
‘Enter’ key on your keyboard.
4.
The webpage of the e-Centre will be shown.
5.
Go to the ‘e-Domotica Products’ page.
6.
Click the ‘Include’ button. The e-Centre will start to search for new e-Domotica
devices.
7.
Press on the button of the motion sensor three times within 1.5 seconds. The
button is located on the backside of the motion sensor, see the image below.
Image 3. Button located on the backside of the motion sensor
8.
The e-Centre webpage will inform you if the product is found.
If the product is not found, click the ‘Remove’ button on the webpage. Press the button
on the motion sensor three times within 1.5 seconds to exclude/empty the device. You
can now include the device again using the steps above.
9.
Provide a name and location for the device and click ‘Save’.
10. The EM6581 is now added to your e-Centre and can be used.
11. Screw the back panel on the motion sensor.
Mounting the motion sensor is explained later in this manual.
4.0 Setup an absence alarm or night alarm
You can use this motion sensor for one or more alarm groups. In this chapter the
motion sensor is added to an absence alarm.
