3
|
ENGLISH
trigger the EM6575 e-Domotica Siren for example. Or notify you via the online e-
Domotica Portal by phone, text message or email.
It is also possible to use the EM6581 for more comfort at home, for example to switch
on lighting automatically when you enter a room. When no motion is detected
anymore, the lights can also be switched off automatically, or switched off
automatically after several (preset) minutes). Save energy and reduce your energy bill.
1.2 Packing contents
The following parts need to be present in the packing:
•
e-Domotica Motion Sensor
•
Manual
•
Double sided adhesive tape
•
Screws and plugs
•
Batteries (3x AA)
2.0 Install the battery
Before you can use the motion sensor, the battery needs to be installed.
Follow these steps:
1.
Unpack the motion sensor and the battery.
2.
Unscrew the back panel from the motion sensor. The screw is located at the
bottom of the device.
3.
Carefully remove the back panel, see the next drawing.
Image 1. Opening the motion sensor
