INSTALLATION INSTRUCTIONS
E-MT5, E-MT6, AND E-MT7 SERIES
Document
Date
Drawing/Page
DCR#
CI308X10R1
JAD
10-162
08/02/10
w w w. e - c o n o l i g h t . c o m
8 8 8 . 2 4 3 . 9 4 4 5
FA X : 2 6 2 . 5 0 4 . 5 4 0 9
1. Turn power supply off.
2. Connect the black fixture lead (120V) to the HOT (usually black)
supply lead.
3. Connect the white fixture lead to the white supply lead
(COMMON).
4. Connect ground as appropriate.
(NOTE: This fixture will have
either a “Green Ground lug” or a ground wire for grounding
the fixture.)
5. Cap and insulate all unused leads.
6. Be sure any unused wiring entrances are closed with closure
plugs provided.
INCANDESCENT FIXTURES
WIRING
1. Turn power supply off.
2. Connect the appropriate ballast voltage lead (120V or 277V) to
the HOT (usually black) supply lead.
3. Connect the ballast “Common” lead (usually white) to the
incoming “Common” lead (usually white).
4. Connect ground as appropriate.
(NOTE: This fixture will have
either a “Green Ground lug” or a ground wire for grounding
the fixture.)
5. Cap and insulate all unused leads.
6. Be sure any unused wiring entrances are closed with closure
plugs provided.
HID FIXTURES
1. Turn power supply off.
2. Connect the black fixture lead to the HOT (usually black) supply
lead.
3. Connect the white fixture lead to the white supply lead
(COMMON).
4. Connect ground as appropriate.
(NOTE: This fixture will have
either a “Green Ground lug” or a ground wire for grounding
the fixture.)
5. Cap and insulate all unused leads.
6. Be sure any unused wiring entrances are closed with closure
plugs provided.
FLUORESCENT FIXTURES
