QtCAM
See3CAM_80 User Manual
12-Nov-15
www.e-consystems.com
|
Subject to change without notice
Page 6 of 30
To launch QtCAM application, we have to run following command from the terminal.
$ sudo qtcam
To install in
Ubuntu 12.04
from Ubuntu Launchpad, we have to run following commands in
terminal
$ sudo apt-add-repository ppa:qtcam/precise
$ sudo apt-get update
$ sudo apt-get install qtcam
To launch QtCAM application, we have to run following command from the terminal.
$ sudo qtcam
When application is launched, home screen will look like the image below:
7 Application Features
The features that are supported in the current version of QtCAM are briefly described below:
1.
Enumeration and Selection of camera device
2.
Still capture
3.
Video recording
4.
Camera Settings
a) Image Quality Settings
b) Still Capture Settings
c) Video Capture Settings
5. Extension settings
7.1 Enumeration and Selection of camera device
Application will emulate only the usb e-con devices connected to the system. The device name
